AGV SAFETY EGDE SWITCH automatic doors Sensing edges SENSOR

Safety touch edge widely used

With the use and popularity of the now large industrial equipment, security has become the most attention topic, many electronic device to assure the safety of people also arises at the historic moment, safe touch the edge is one of them, also known as the edge of security, as the name implies, as long as the edge, it will be dangerous, this kind of equipment, is a kind of look like rubber, stress triggers the sensitivity of the switch.

The safety edge, and the safety buffer mounted on top of it, is a very flexible band that can be bent and folded, and can be fixed in many places, such as machine tool workbenches, where electric doors are squeezed, and the sharp edges of many devices.

After installation, when the moving object of the device impinges on the operator, the flexible edge of the installation receives a signal of impact and compression, which is quickly transmitted to the power source, which stops working to prevent injury.

Safety touch edges, as well as safety buffers, are grouped into the belt device.Safety touch edges, and safety buffers, not to say to restrict access, but to pressure sensitive, to feel.The safety edge and the safety buffer are completely protected by the sense, the pressure sensitivity, and the signal transmitted to the switch.Therefore, the safety edge of the relevant control circuit is very important, in general, the use of these safety edge, can only be used in some of the power once stopped, the movement can immediately stop the relevant machine, to ensure personal safety.

The safety edge and the two parts, the buffer, and the controller together form a very flexible emergency evacuation power system, which is used in situations where the operator's requirement is to be able to stop the dragging device very quickly and conveniently.

Safety margin guarantees personal safety.It is a necessary safety device.

Rated current and rated voltage of rubber safety touch switch: refers to the safety voltage allowed by the switch in normal operation. The voltage applied to both ends of the switch is greater than this value, which will cause a spark breakdown between the two contacts.